Otterbine Phoenix Floating Pond Fountain
The Phoenix’s two-tiered pattern combines aesthetics with
is popular in commercial and residential settings alike. All of the
Otterbine Fountains are
sold with the float, motor, control panel and quick disconnect. Power
cable can be purchased separately by the foot.
- Energy Efficient:
- Provides Natural & Effective Water Quality Solutions:
- Shallow Operating Depth:
- Interchangeable Patterns:
- Proven Performance:
- Pattern Guarantee:
- Complete Package:
- Comprehensive Warranty:
- Corrosion Resistant:
- Safety Listed & Protected:
Each of the patterns under the 1HP-5HP Aerating Fountain line carries an all inclusive 5 year warranty. This warranty extends to the complete package including the unit, cable and power control center.
Warranty can be performed by more than 100 factory trained and certified Otterbine Service Centers found worldwide, or by Otterbine directly. A copy of the warranty statement for this product can be found within the owner’s manual. For warranty to be honored, a physical inspection of the unit must be performed by an authorized Otterbine Service Center between years 3 and 4.
Once a year: Disconnect the unit from the power source and physically inspect the aerator and underwater cable for any cuts, cracks or breaks as these may cause oil leaks or electrical shorts. Inspect and clean the pumping chamber components and screen.
After Every 3 Running Seasons: Perform a simple oil change. Otterbine oil must be used for this oil change for environmental and heat dissipation purposes. Otterbine oil can be purchased through Otterbine distribution with part number: 12-0077.
Units considered under the Aeration Line (Sunburst, Gemini and Saturn) can remain in the water during the winter but need to run a minimum of 12 hours per day, and should run 24 hours per day when temperatures drop below 20o Fahrenheit or -7o Celcius.
All units under the Decorative Line should be removed from the water in freezing climates.
Basic Installation Guidelines
- Unit Assembly:
- PCC Installation:
- Power Cable:
- Anchor/Mooring Unit in Water:
Installation is fairly simple, but will require the services of a certified electrician. Tools and materials required can include: a shovel (to bury/trench cable,) conduit, nylon rope, cinder blocks (when anchoring), boat (when anchoring,) rebar or duckbill anchors (when mooring), and two 1/2in or 13mm sockets/wrenches. Complete installation instructions will be found within the Concept 3 owner’s manual which will be provided with the delivery of the product.
|60Hz||1 HP||2 HP||3 HP||5 HP|
|Spray Height (ft)||Upper:
|Spray Diameter (ft)||Upper:
Low amperage systems mean less electrical consumption and low running costs.
Provides Natural & Effective Water Quality Solutions:
Introduces oxygen into the water column for the most natural solution to water quality management, effectively controlling algae, aquatic weeds, and foul odors.
Shallow Operating Depth:
Operates in 30in or 75cm of water
Change patterns in less than 30 minutes.
Otterbine is the only manufacturer to have oxygen transfer and pumping rates independently tested and published on their aeration systems. View results.
Aerating fountains are backed by a “Pattern Guarantee”, if you don’t love the pattern we’ll swap it out for another.
Includes unit, panel* and cable with cable quick disconnect for ease of installation.
All-inclusive 5-year warranty on unit, cable and power control center*.
Able to operate in brackish and effluent conditions.
Safety Listed & Protected:
Package electrically safety tested and listed with ETL, ETL-C. Products for European Union are also safety tested, approved and carry a 3rd party independent CE mark.
*Power control center is not a standard item on 50Hz packages.